Brief introduction of wood plastic floor manufacturers, the surrounding temperature and humidity of the mechanical room do not meet the national standards, which leads to the tightening of the melamine electronic veneer of the raised floor in the room, resulting in shells and cracks in the scenery. The actual result has to be released and leaked, which is common in mechanical equipment. failure.
Because the ambient temperature and ambient humidity of the rooms in North China do not meet the method standards stipulated by the state. When the heater is turned on in winter, the environmental humidity does not meet the national standard, and the natural environment is very high humidity. The melamine electronic veneer shrinks rapidly to create the shell and separate the scenery. The actual result after the environmental humidity of the computer room does not meet the national standard, and all the mechanical equipment in the computer room cannot meet the precautions, may cause major and bad results. Unless the incentive measures are ambient humidity, they have to induce the natural environment conditions of the computer room and the natural environment conditions of the raised floor of the room. The country stipulates the following standards:
The relevant method clauses in SJ/T10796-2001 of the epidemic prevention supervision and testing agency of the Ministry of Industry and Information Technology on epidemic prevention raised floor standards and related standards, Article 6.2 of the standard: clearly grasp the use of epidemic prevention in the function of the raised floor. The ambient temperature of the raised floor is 232 degrees Celsius and ambient humidity of 45%.
In addition to the country where the computer room is located, three of the national standard GB2887-89 preconditions for the computer location method stipulate the ambient temperature and ambient humidity standards in the startup opportunity room, of which the ambient temperature is Class A 22 2, Class B 15 ~ 30, Class C 10 to 35.
